(HP of Compressor)
Order the model name according to the pressure to apply. In addition, the pressure of the control air entering the cylinder should be 4 to 6 bar, no matter what the general pressure is, whether it is low (L) or high (H). The control pressure range shall be matched to the regulation and the quality of the air shall be dried and cleaned. Be careful if you use moist and contaminated air, it can not be guaranteed a proper life.
The sight glass enables the operator to check whether real-time turbo traps are operational or if condensate flows well from each point to the Turbotrap. The sight glass is automatically supplied with Turbotrap 100 and optional with Turbotrap 50.
When using this mounting bracket, installation of Turbotrap can be ensured. In addition, if there is a vibration at the point on the site where condensate is generated, the inlet must be used as a high-pressure hose or as a flexible tube.
Any Queries: firstname.lastname@example.org
COPYRIGHT(C) 2017 ACE Corp. ALL RIGHTS RESERVED.